The round thing at the top is a barrel jack you use to charge the device.
The prongs of the shock collar have been unscrewed prior to the picture being taken, then the holes covered with electrical tape.
There’s a strip of electrical tape across the bottom of the black box, and if you get the contrast ratio right you can even make out the little depression in the tape where the prong holes are. You can make out the tape as it’s moving in the unedited clip as well since it has a matte finish and the plastic around it is shiny. There seem to be a couple dog hairs stuck in the sides of the strip of tape. While it’s possible that the tape was there the whole time, it doesn’t look like a place where the thing would crack, and it isn’t applied in such a way that it would hold anything together. I can’t see any other purpose for it than to cover the prong holes in hopes the camera wouldn’t pick it up, which it very nearly didn’t.
Is there no tape? In the picture it looks like tape. Hopefully it’s clear that I’m being completely sincere in this, since you can see I spent an unhealthy amount of time in this thread arguing against the “Kaya was shocked” interpretation of events.
I am pretty certain dog hairs would be caught in the tape over time normally, and it seems possible that there was just a crack or something, e.g. the collar got caught on something that scraped it, so the tape is there to prevent the scrape from scraping Kaya or something (since abrasions to rigid surfaces can themselves be hazards in that way). You also didn’t mention about if they could be the little nodes for a vibration collar, since he says that’s what it is and I don’t see where else it would have the nodes (though I assume on a shock collar that also vibrates, the same prongs do both).
I’ve never used a collar with electronic parts, if it wasn’t clear, just mechanical kinds.
It’s unlikely it got caught on something since the scratch would be on the inside edge, against her neck. I’ll admit I haven’t heard of a vibration collar having nodes on it. I don’t know what they would be for, besides replicating the feeling of a shock collar if you have a dog who has been trained to only listen when they think they’re wearing one.
Looking at the options on Amazon I don’t see any vibration only collars with prongs, and the vibration only collars seem to be generally much slimmer than the shock collars, which stick out more, similar to Kaya’s.
I also see a lot of very bad remote design decisions, where the shock button could be easily pressed by mistake, and the intensity dial could easily be adjusted unintentionally. That could be one explanation for the “yelp” clip, but the dewclaw explanation is reasonable as well. I certainly don’t think he’s willfully tazing his dog all the time. I do believe it’s a shock collar though.
Why would he not remove that tape, and hold the thing up to the camera, so as to remove any doubt? He even seems a bit sheepish in the clip where he shows it off. Showing us a closeup of the model number would be ideal.
That’s obviously not the model on Kaya, but neither is your comparison picture (not that you were saying it was, of course). By coincidence, this collar is also pretty bulky, though I’d say not as bulky as the reference. This is just the first one that I saw, the 17th entry for “vibration collar” on my google image search (though I think such things are tailored to the user, so you might get it in a different spot). The 20th entry also appears to have nodes. These are specifically only vibration, there are others with longer prongs that do both vibration and shocks.
Mechanically, I’m not sure why they’d have them being nodes. My guess is energy efficiency, since they need to move less mass, and more acute stimuli are usually going to work better anyway, plus it’s in a fixed position, so it’s not like a phone or something that gets jostled around and could never have just a little node or two. I’m just speculating from an uneducated standpoint, though.
I agree that he should have done more wrt to showing the exact specifications of the collar, even if I think body language analysis is a bit pointless.
The nodes in both examples are sticking out way more than what would potentially be under the tape. Lets say it’s possible there exists a vibrating version of the electric collar, which is packaged in the same case, and because of some quirk of the injection molding there is a small depression or raised part where the prongs would be if it was the shock version. I still don’t get the tape.
I’m not saying that it is the same model, but now I’m curious where you see that it definitely isn’t. They look identical to me.
I’m not convinced that he shocked her, or shocked her on purpose in that clip and I never said he did.
The nodes in both examples are sticking out way more than what would potentially be under the tape. Lets say it’s possible there exists a vibrating version of the electric collar, which is packaged in the same case, and because of some quirk of the injection molding there is a small depression or raised part where the prongs would be if it was the shock version. I still don’t get the tape.
Yeah, idk, my assumption is that the inner face got messed up. I don’t really understand what you said before about why that wouldn’t happen.
I’m not saying that it is the same model, but now I’m curious where you see that it definitely isn’t. They look identical to me.
They are definitely very similar, but the thing that looks like an LCD display on the side looks like it has different dimensions beyond the camera angle difference, and there’s some other stuff going on with Kaya’s collar where I just can’t make out what’s going on. Is there also a side band of tape? They might be the same though.
I’m not convinced that he shocked her, or shocked her on purpose in that clip and I never said he did.
I’ve noted you repeating this and you might notice that I didn’t accuse you of saying that in my previous comment, because I saw you repeating this and accept it.
The round thing at the top is a barrel jack you use to charge the device.
The prongs of the shock collar have been unscrewed prior to the picture being taken, then the holes covered with electrical tape.
Thanks for explaining what the jack is. I still don’t understand how you’ve coming to that conclusion about there having been prongs. Am I just blind?
There’s a strip of electrical tape across the bottom of the black box, and if you get the contrast ratio right you can even make out the little depression in the tape where the prong holes are. You can make out the tape as it’s moving in the unedited clip as well since it has a matte finish and the plastic around it is shiny. There seem to be a couple dog hairs stuck in the sides of the strip of tape. While it’s possible that the tape was there the whole time, it doesn’t look like a place where the thing would crack, and it isn’t applied in such a way that it would hold anything together. I can’t see any other purpose for it than to cover the prong holes in hopes the camera wouldn’t pick it up, which it very nearly didn’t.
It’s not even electrical tape, it’s literally just the collar
Is there no tape? In the picture it looks like tape. Hopefully it’s clear that I’m being completely sincere in this, since you can see I spent an unhealthy amount of time in this thread arguing against the “Kaya was shocked” interpretation of events.
I am pretty certain dog hairs would be caught in the tape over time normally, and it seems possible that there was just a crack or something, e.g. the collar got caught on something that scraped it, so the tape is there to prevent the scrape from scraping Kaya or something (since abrasions to rigid surfaces can themselves be hazards in that way). You also didn’t mention about if they could be the little nodes for a vibration collar, since he says that’s what it is and I don’t see where else it would have the nodes (though I assume on a shock collar that also vibrates, the same prongs do both).
I’ve never used a collar with electronic parts, if it wasn’t clear, just mechanical kinds.
It’s unlikely it got caught on something since the scratch would be on the inside edge, against her neck. I’ll admit I haven’t heard of a vibration collar having nodes on it. I don’t know what they would be for, besides replicating the feeling of a shock collar if you have a dog who has been trained to only listen when they think they’re wearing one.
Looking at the options on Amazon I don’t see any vibration only collars with prongs, and the vibration only collars seem to be generally much slimmer than the shock collars, which stick out more, similar to Kaya’s. I also see a lot of very bad remote design decisions, where the shock button could be easily pressed by mistake, and the intensity dial could easily be adjusted unintentionally. That could be one explanation for the “yelp” clip, but the dewclaw explanation is reasonable as well. I certainly don’t think he’s willfully tazing his dog all the time. I do believe it’s a shock collar though.
Why would he not remove that tape, and hold the thing up to the camera, so as to remove any doubt? He even seems a bit sheepish in the clip where he shows it off. Showing us a closeup of the model number would be ideal.
When I was casually looking it up for comparison I pretty quickly saw a vibration collar that uses nodes: https://www.petpawsabilities.com/cdn/shop/products/DC680Vnew.jpg?v=1605896488&width=823
That’s obviously not the model on Kaya, but neither is your comparison picture (not that you were saying it was, of course). By coincidence, this collar is also pretty bulky, though I’d say not as bulky as the reference. This is just the first one that I saw, the 17th entry for “vibration collar” on my google image search (though I think such things are tailored to the user, so you might get it in a different spot). The 20th entry also appears to have nodes. These are specifically only vibration, there are others with longer prongs that do both vibration and shocks.
Mechanically, I’m not sure why they’d have them being nodes. My guess is energy efficiency, since they need to move less mass, and more acute stimuli are usually going to work better anyway, plus it’s in a fixed position, so it’s not like a phone or something that gets jostled around and could never have just a little node or two. I’m just speculating from an uneducated standpoint, though.
I agree that he should have done more wrt to showing the exact specifications of the collar, even if I think body language analysis is a bit pointless.
The nodes in both examples are sticking out way more than what would potentially be under the tape. Lets say it’s possible there exists a vibrating version of the electric collar, which is packaged in the same case, and because of some quirk of the injection molding there is a small depression or raised part where the prongs would be if it was the shock version. I still don’t get the tape.
I’m not saying that it is the same model, but now I’m curious where you see that it definitely isn’t. They look identical to me.
I’m not convinced that he shocked her, or shocked her on purpose in that clip and I never said he did.
Yeah, idk, my assumption is that the inner face got messed up. I don’t really understand what you said before about why that wouldn’t happen.
They are definitely very similar, but the thing that looks like an LCD display on the side looks like it has different dimensions beyond the camera angle difference, and there’s some other stuff going on with Kaya’s collar where I just can’t make out what’s going on. Is there also a side band of tape? They might be the same though.
I’ve noted you repeating this and you might notice that I didn’t accuse you of saying that in my previous comment, because I saw you repeating this and accept it.